安装

部署项目从Ubuntu转战到CentOS, 使用yum命令安装supervisor后,发现无法正常使用,因此只有使用pip安装.

:::bash
$ sudo pip install supervisor

配置supervisor

  1. 添加配置文件

    :::bash
    $ sudo mkdir /etc/supervisor
    $ sudo mkdir /etc/supervisor/conf.d
    # 添加如下配置文件
    $ cat /etc/supervisor/supervisord.conf
    [unix_http_server]
    file=/var/tmp/supervisor.sock    ; (the path to the socket file)
    chmod=0700                       ; sockef file mode (default 0700)
    
    ; the below section must remain in the config file for RPC
    ; (supervisorctl/web interface) to work, additional interfaces may be
    ; added by defining them in separate rpcinterface: sections
    [rpcinterface:supervisor]
    supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
    
    
    [supervisord]
    http_port=/var/run/supervisor.sock ; (default is to run a UNIX domain socket server)
    ;http_port=127.0.0.1:9001  ; (alternately, ip_address:port specifies AF_INET)
    ;sockchmod=0700              ; AF_UNIX socketmode (AF_INET ignore, default 0700)
    ;sockchown=nobody.nogroup     ; AF_UNIX socket uid.gid owner (AF_INET ignores)
    ;umask=022                   ; (process file creation umask;default 022)
    logfile=/data/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
    logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB)
    logfile_backups=10          ; (num of main logfile rotation backups;default 10)
    loglevel=debug              ; (logging level;default info; others: debug,warn)
    pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
    nodaemon=false              ; (start in foreground if true;default false)
    minfds=1024                 ; (min. avail startup file descriptors;default 1024)
    minprocs=200                ; (min. avail process descriptors;default 200)
    childlogdir=/data/log/supervisor ; ('AUTO' child log dir, default $TEMP)
    
    ;nocleanup=true              ; (don't clean up tempfiles at start;default false)
    ;http_username=user          ; (default is no username (open system))
    ;http_password=123           ; (default is no password (open system))
    ;user=chrism                 ; (default is current user, required if root)
    ;directory=/tmp              ; (default is not to cd during start)
    ;environment=KEY=value       ; (key value pairs to add to environment)
    
    [supervisorctl]
    serverurl=unix:///var/tmp/supervisor.sock ; use a unix:// URL  for a unix socket
    ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
    ;username=chris              ; should be same as http_username if set
    ;password=123                ; should be same as http_password if set
    ;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
    
    ; The below sample program section shows all possible program subsection values,
    ; create one or more 'real' program: sections to be able to control them under
    ; supervisor.
    
    ;[program:theprogramname]
    ;command=/bin/cat            ; the program (relative uses PATH, can take args)
    ;priority=999                ; the relative start priority (default 999)
    ;autostart=true              ; start at supervisord start (default: true)
    ;autorestart=true            ; retstart at unexpected quit (default: true)
    ;startsecs=10                ; number of secs prog must stay running (def. 10)
    ;startretries=3              ; max # of serial start failures (default 3)
    ;exitcodes=0,2               ; 'expected' exit codes for process (default 0,2)
    ;stopsignal=QUIT             ; signal used to kill process (default TERM)
    ;stopwaitsecs=10             ; max num secs to wait before SIGKILL (default 10)
    ;user=chrism                 ; setuid to this UNIX account to run the program
    ;log_stdout=true             ; if true, log program stdout (default true)
    ;log_stderr=true             ; if true, log program stderr (def false)
    ;logfile=/var/log/cat.log    ; child log path, use NONE for none; default AUTO
    ;logfile_maxbytes=1MB        ; max # logfile bytes b4 rotation (default 50MB)
    ;logfile_backups=10          ; # of logfile backups (default 10)
    
    
    [include]
    files = /etc/supervisor/conf.d/*.conf
    

项目的配置文件写入 /etc/supervisor/conf.d/目录即可

添加开机启动

:::bash
# 添加如下配置文件
$ cat /etc/init.d/supervisord

#!/bin/bash
#
# /etc/rc.d/init.d/supervisord
#
# Supervisor is a client/server system that
# allows its users to monitor and control a
# number of processes on UNIX-like operating
# systems.
#
# chkconfig: - 64 36
# description: Supervisor Server
# processname: supervisord

# Source init functions
. /etc/rc.d/init.d/functions

prog="supervisord"

prefix="/usr"
exec_prefix="${prefix}"
prog_bin="${exec_prefix}/bin/supervisord"
PIDFILE="/var/run/$prog.pid"
DAEMON_OPTS="-c /etc/supervisor/supervisord.conf $DAEMON_OPTS"

start()
{
    echo -n $"Starting $prog: "
    daemon $prog_bin $DAEMON_OPTS --pidfile $PIDFILE
    [ -f $PIDFILE ] && success $"$prog startup" || failure $"$prog startup"
    echo
}

stop()
{
    echo -n $"Shutting down $prog: "
    [ -f $PIDFILE ] && killproc $prog || success $"$prog shutdown"
    echo
}

case "$1" in

start)
start
;;

stop)
stop
;;

status)
    status $prog
;;

restart)
stop
start
;;

*)
echo "Usage: $0 {start|stop|restart|status}"
;;

esac

设置如下:

:::bash
$ sudo chmod +x /etc/init.d/supervisord
$ sudo chkconfig --add supervisord
$ sudo chkconfig supervisord on
$ sudo service supervisord start